HD Installation projector with LED/LASER, 20000 hours light source
The PTRW330 features 3,500 lumens of brightness. Rate of brightness deterioration in the LED/Laser-combined light source is extremely slow compared to lamp-based projectors.
The SOLID SHINE drive uses a built-in sensor to constantly detect the light intensity of the light source and correct corresponding changes in white balance. This all helps to maintain excellent picture quality for a long period of time.
Contrast is outstanding too, at 10,000:1, and images are reproduced with a wide dynamic range. The PT-RW330 also features a HD (1280x 800) DLP™ chip, allowing highly detailed Full-HD images without resizing.
- LED/Laser DLP projector
3500lm brightness with WXGA resolution
10.000:1 contrast ratio
Up to 20,000 hours’ maintenance-free operation
LED/Laser construction ensures no need for lamp or filter replacement
Long-lasting picture quality and superb colour reproduction
DIGITAL LINK compatibility allows video, audio and control signals to be transmitted up to 100 metres over a single LAN cable
This new light source requires no maintenance for approximately 20,000 hours. In many cases, this means no projector maintenance until your next refresh cycle. Naturally, there are no lamp burnout problems during use, so reliability is further increased. There is also no filter to clean due to carefully engineered sealed optics.
As a consequence, running cost is dramatically lowered because of the savings on lamp costs, maintenance labor and hassle of stocking lamps.
Long Lasting Picture Quality
Excellent picture quality and brightness are maintained for a long time.
Superb colour Reproduction
Beautiful, vivid colors exceeding the levels of conventional projectors.
Quick start on/Off
The image appears almost instantly upon powering up the PT-RW330, and there is no need for cooling after turning the power off. The power can be turned on immediately after being turned off, and it can be turned on/off as many times as you want.
The LED/Laser-combined light source has a higher level of color purity than an ordinary lamp, allowing it to achieve color reproduction with wider color space. Colors are more vibrant than those of conventional projectors.
30x high speed switching prevents colour breaking
In 1-chip DLP™ system projectors with conventional lamp, a color wheel is used for time-division multiplexing in a method where the human eye combines the result to achieve a full-color palette. In the PT RW330, this is done by on/off switching of the LED/Laser-combined light source. A unique Panasonic power supply circuit provides time-division multiplexing with ultrafast 30x drive. The resulting, high-definition images exhibit virtually no color breaking.
Heat Pipe Cooling System
Laser cooling is performed by releasing the heat to cooling fins, then cooling with a heat pipe cooling system. This suppresses temperature rises inside the projector and allows stable operation up to an ambient temperature of 45 °C (113 °F). The use of this heat-pipe cooling system also achieves quiet operation of 29 dB, enabling viewers to concentrate on the presentation or on quiet movie scenes.
The area between the LED/Laser to the DLP™ chip and prism is hermetically sealed to form an airtight structure for the optical block, the heart of the projector. This resists the effects of dust and other particles in the air and enables use of the projector in a wide range of environments.
Panasonic’s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.
This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.
rec 709 mode
Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709,
when images from an HDTV source are projected.
Horizontal / Vertical Lens Shift
The wide shift range accommodates various room sizes and shapes.
When lights or ventilation holes are located in the ceiling mounting site, you can simply relocate the projector to avoid them.
Digital LInk - Signals up tp 100m
Equipped with a DIGITAL LINK terminal, the PT-RW330 allows transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations
Optional ET-YFB100G Digital Interface Box for Easy Setup
By combining the optional ET-YFB100G Digital Interface Box, with its HDMI and other input terminals, uncompressed HD digital video, audio and control signals can be transmitted up to 100 m (328 feet) over a single CAT5e (STP) cable or higher. It allows projector connection with only one cable, making it ideal for ceiling-mounted and other permanent installations.
Also, because control signals can be simultaneously transmitted, the ET-YFB100G input signal can easily be switched with the wireless remote control that is included with the projector. The projector can be controlled by either serial or LAN communication.
Easy Remote Monitoring and Control over LAN
Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you the overall projector status.
In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.
The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.
Panasonic PT-RW330ea Connections
In the Box