1300 88 11 79
Laser Light Source 3-Chip WUXGA LCD Projector with 5,500 lm of Brightness
The PTMZ570e uses light sources that group laser diodes into a number of modules. Based on redundant design, the laser diodes are put to considerable use, so over the long term, if a laser diode were to stop functioning, a protective circuit would activate to keep the brightness drop extremely small. Even if this were to happen during 24/7 operation, it would not result in downtime. The dual drive structure also keeps the optical engine output uniformly bright and colorful even if the light source's original brightness is different due to aging degradation.
Panasonic PT-MZ570e Highlights
Continuious maintenance free Operation
No need to replace a lamp or air filter, providing a dramatic reduction in the Total Cost of Ownership (TCO).
Excellent picture quality and brightness are maintained for a long time.
A new heat-resistant material is used in the phosphor wheel to withstand the high output of the laser light source. Combined with a drive system that is also optimized for the light source, this made it possible to achieve 5500 lm of brightness in a 3-chip LCD projector. Actually, the result of Panasonic efforts to optimize color reproduction enabled a perceived brightness that even exceeds the specification values, thus opening the door to a wide range of applications for the PTMZ570.
3,000,000:1 High Contrast
The PT MZ570 projectors directly control the output of the laser light source itself, enabling faster response than lamp-based projectors. Frame-by-frame scene-linking modulation with complete digital control makes it possible to adjust the light output with higher precision. This gives the pt-mz570 its remarkable 3,000,000:1 contrast without lowering brightness. This enables highly precise contrast control even when bright and dark scenes suddenly or frequently interchange. There is also almost no reduction in contrast when the projector is used for extended periods of time.
Duel Drive Laser - long Life
The rate of brightness deterioration in the laser light source is extremely slow compared to lamp-based projectors.
Built-in brightness and color sensors eliminate fluctuations in brightness and color to constantly maintain the optimal balance. Together with a durable optical system, the PT-Mz570 maintains excellent picture quality for a long period of time. In many cases, this means no maintenance until the next refresh cycle.
Normal Mode Enables Approx. 20,000 Hours of Continuous Operation
In NORMAL mode with brightness of 5,500 lm, the PTMZ570 projector requires no maintenance for approximately 20,000 hours. These modes are suitable for frequent but not continuous usage, such as education or signage applications.
With the MZ670 series you don’t need a computer to present – just plug in a USB and start projecting straight away using the Plug and Share application
Brilliant Picture Quality
Low Maintenance with ECO Functions
Excellent System Flexibility
Panasonic PT-MZ570e Connections
All Panasonic Projectors are supplied with a bulb, The replacement projector lamp for the Panasonic PT-MZ570e is the No Replacement
Do You Need a Spare / Backup lamp?
Lamps can blow, to keep your projector working without down time, keep a spare lamp available. The replacement projector lamp for the Panasonic PT-MZ570e is the No Replacement.
No Replacement Projector Lamp Options
5500 Lumens, W ( W Eco), Laser/Phosphor Lamp, Life expectancy 20000(½Life) hours (24000(½Life) Eco)